You are watching: 9 foot pre cut stud length
When friend hear the ax 9" ceiling indigenous a residence builder is it a true 9" from perfect floor to perfect ceiling.
It have to be . Yet it depends on the framer when he cut the studs, go he allow for the ceiling and also floor end up when the measured the cut for the size of the studs.
If The publish showed a ceiling elevation of 9" then i would have actually my rough height at 9"-1" or else my drywall contractor would have actually my head for cutting all the bottoms of the reduced boards. Together i mentioned over it depends on the contractor,
If The publish showed a ceiling elevation of 9" then i would have my rough elevation at 9"-1" or else my drywall contractor would have my head for cutting every the bottom of the reduced boards. As i mentioned above it relies on the contractor,
9" 1" - 1/2" ceiling drywall - 3/4" floor less than 9" for this reason it relies on what the to plan show. Lock will show finished height, so you need to know what to change for ceiling and floor finishes.
Most framers don"t actually cut their studs to length for 8", 9", and 10" walls. They buy pre-cut studs. A 9" pre-cut stud is 104-5/8", which linked with a full of 3 plates, produces a 9" wall. I would certainly not counting on specifically 9".
They buy pre-cut studs. A 9" pre-cut stud is 104-5/8", which merged with a full of 3 plates, produces a 9" wall. I would not counting on precisely 9".Correct KC. What ns was make the efforts to explain on short article #3 was to have actually a rough elevation of 9" would not be practical, her pre cut stud would be 104-5/8" plus her 3 plates of 4-1/2" leaves you v a rough height of 9"-1-1/8" so include your ceiling which I typically use 5/8" add your 4" paper to the top provides you room for your for paddles to lift the 5" sheet up tight to the upper sheet. Include your floor end up ( 3/4 hardwood) leaves you with a finished height of 1/4" short of 9" Sorry because that the cunfussion Guys. BOB.
See more: Black And Mild Expiration Date Code, Black And Mild Expiration Code
How can I advanced a garage floor, level with the remainder of the house.Is there any website I have the right to go to, through illustrations or photos so I have the right to see.I am brand-new to this, but I recognize I can do this project, and so If I have the right to see it then I have a better ideal.The garage is a typical garage, that goes to a "shureview" house that the model.It is because that a home I have actually down toms river, nj.I desire to converted to a room, but I was reasoning of rasing it to accomplish the rest of the house.How lot wood etc,...do ns need.thanks-louie
I went with 8" studs, bottom bowl + 2x height plate = 4.5"Subtract 1/2" ceiling & 3/4" floor = 8" 3.25"My garage ns did the same, with the included height indigenous the foundation walls I"ll end up through a ~9 wallMy sunroom has a cathedral ceiling, the outside wall surface is ~9" before the brick floor go inIf you want it exact you need to specify what you desire as perfect height
This is an older thread, you might not obtain a response, and could it is in reviving one old thread. Please take into consideration creating a brand-new thread.
A forum community devoted to do it yourself-ers and also home improvement enthusiasts. Come sign up with the discussion around tools, projects, builds, styles, scales, reviews, accessories, classifieds, and more! helping You to execute It Yourself!