Ge Universal Remote Codes For Magnavox Digital Converter Box Remote Codes

ge universal remote codes

Programming your GE universal remote with GE Universal Remote Codes will allow you to operate multiple devices with one GE remote. Home entertainment devices such as TV, blu-ray, television, DVD player, VCR, stereo systems can be programmed with GE universal remote. you will need ge universal remote codes to program devices, we have listed CL2, CL3, CL4, and CL5 type codes.

You are watching: Ge universal remote codes for magnavox digital converter box

Find universal remote codes for your device.

GE universal remote controls can operate audio and video devices of almost any brand. For each of your audio/video devices, you have to enter a Device specific GE Universal Remote Codes in the universal remote control. Programming your GE universal remote will allow you to use the remote with different devices, including your blu-ray, television, DVD player, VCR, stereo systems.

Have you ever had to juggle with multiple remotes to control your TV , Blu-Ray and Home theater, missing remotes and hours wasted searching each remote. Now with GE Universal Remote you can control all your home theater devices, we have a quick and simple auto-code Search method and manual code entry method. Programming universal remote is error prone and takes time so, set aside some time before you begin.

Make sure to hookup and power on all the devices you want to setup. next make sure the batteries are working in the GE universal remotes. Note down the GE universal remote codes from the list provided. Nothing is more frustrating to find out that you have not hooked up or universal remote batteries are bad after spending your evening on programming GE remote.

How to find your GE Remote Model and code list version sticker

Flip your remote, Open battery cover remote batteries, you will see a sticker showing the Mode and code list version. There are three code list versions, one CL3 , second CL4 and third CL5. we have listed complete GE universal remote code list Goto GE remote Codes based on the code list version, saving you lot of hassle navigating and selecting options on multiple pages.

How to Program a GE Universal Remote Control.

Using the code(s) provided above, program the remote control directly using the following steps.

Enter Setup Mode

Press and hold down the SETUP button on the remote until the red light on the remote turns on. Release the SETUP button. The red light will remain on.

NOTE: The red light with either be a small light at the top of the remote or the power on/off button.

Press the device type button

Press and release the device button on the remote for the type of device you wish to control. The red light will blink once and remain on.

NOTE: If there is not a device button on the remote for your type of device, you can use any device button on the remote.

Tests the results

Point the remote at the device. Test the buttons on the remote to see if the device responds as you would expect. If the buttons do not operate the device, return to Step 1 above and use the next code in the list.

ge universal remote codes for DVD

ge universal remote codes for DVD-Recorders + RW

Note: Where codes are shown like this , each one can be used if you have 2 or more of the same device.

`ge universal remote codes for VCR`

HDTV Set Top Boxes:

`ge universal remote codes for SAT/DTV/WebTV`

Note: Where codes are shown like this: it means that each one can be used if you have two or more of the same device.

`ge universal remote codes for TV/VCR Combos`

Note: Where the code is listed as the first code is for the TV and the second for the VCR. Otherwise one code operates both the TV and the VCR.

Ex.:DAEWOO <0039 0252> means that code 0039 is for the TV section and 0252 is for the VCR.

`ge universal remote codes for TV/DVD Combos`

Note: Where the code is listed as , the first is for the TV and the second is for the DVD. Otherwise, one code operates both the TV and the DVD.