The inside handles on auto doors fail once the handle come loosened or once the doors are either difficult to open or will certainly not open up at all.

You are watching: How to remove car door handle


Step 1: eliminate the door dashboard screws. Locate all the screws before you start pulling top top the door panel.

Some screws space out in the open, yet others may have a small trim sheathe on them. Some deserve to be concealed behind the take handle as well as around the external edge of the door panel.

Step 2: different the door panel from the fasteners/clips. Making use of the suitable trim panel removal tool, feel approximately the external edge of the door panel.

Typically, you’ll desire to feeling the prior edge, down along the lower edge and around the ago of the door opening. There might be several clips hold the dashboard in place. Insert the trim panel removal tool in between the door and also interior panel and gently pry the door panel loose from the clips.

Note: it is in gentle together these clips deserve to break easily.

Step 3: eliminate the door trim panel. When separated from the retaining clips, gently push up ~ above the door dashboard from the bottom.

The peak edge the the door panel will pop up follow me the window. At this point, reach roughly behind the door dashboard to unplug any kind of electrical connectors for the power window/door lock/trunk/fuel door release buttons. To completely lift the door panel out of place, girlfriend will have to angle the door dashboard and/or the door handle assembly to traction it back through the opened in the door panel to background it completely off.


Step 4: remove the plastic vapor obstacle if needed. Take treatment to eliminate the vapor barrier intact and do not reduced it open.

On some vehicles, the inner door must remain sealed effectively as side air bag sensors may rely top top pressure changes within the door for side affect airbags to deploy. If that is currently damaged or damaged throughout replacement, change the vapor obstacle as quickly as possible.

See more: What Does It Mean When Your Vein Blows, Symptoms, Causes, And Treatment

Step 5: eliminate the inner door take care of mechanism. Unscrew any kind of nuts or bolts holding the door manage in place.

There will be a rod native the inside door handle to the door latch mechanism, usually held together through plastic clips. Closely detach them, eliminate the broken handle, and also replace it v the brand-new one.

Step 6: loosely reinstall the within door panel. Check both the inner and also outer door handle functions prior to securing something in place.

Once you have actually verified the operation of both, reconnect any kind of electrical connectors girlfriend removed and also snap the door panel earlier into the retaining clips. If any type of were broken during disassembly, visit your regional auto components store or dealership because that replacements.

Step 7: Reinstall all screws and also trim pieces. As soon as the door panel is secured top top the retaining clips, reinstall every screws and also trim pieces.

Hand tight is perfect fine, no need to over-tighten them.

An operational door manage is vital for her comfort inside the vehicle and can be a serious inconvenience when broken. If you perform not feeling comfortable performing this job and also if your vehicle needs an inner door manage replacement, be certain to have one that’s certified technicians come to your home or work and perform the repair for you.