Best means to eliminate a damaged lightbulb.

You are watching: Light bulb glass separated from base

irradiate bulbs room made the glass, and also glass breaks. Broken light bulbs are challenging to deal with and can actually be exceptionally dangerous as well. Removed them from the socket is actually easy sufficient if you understand the safe means to execute so, and it doesn’t have tendency to take any kind of special tools. We’ve detailed a few different methods for you to safely remove your broken bulb without the danger of electrocution or laceration.

*
How come Safely eliminate A Lightbulb the Is stuck In The Socket


Things you deserve to use to remove a broken lightbulb:-Lightbulb remover-Pliers-Epoxy-Potato-Screwdriver

Before You eliminate The Lightbulb

Before you even shot to touch the bulb, you have to always cut power to the light source. This will make it much safer to deal with, buy staying clear of the danger of electric shock. Cut the power at the breaker, together just turning off the move isn’t constantly enough to be safe, especially if the irradiate is regulated by an ext than one switch.

Be certain that over there isn’t any type of broken glass ~ above the floor or furniture whereby you’re working. It’s a great idea come wear shoes and also gloves once dealing with any type of project the involves damaged glass. Thoroughly sweep and also vacuum the area, so the you don’t hazard cutting you yourself on hidden glass. Prior to you work on remove the remainder that the bulb, make sure you’re tho wearing her gloves, and put on some protective eyewear, because glass splinters are most likely to happen.


Lightbulb Remover

A lightbulb remover deserve to be purchased can be seen below or at your local home development store. Typically it will come in a kit v an attachments that gets rid of all species of light bulbs from high ~ above the ceiling. It will certainly include numerous pieces to remove and also replace light bulbs either damaged or new.

*
Broken bulb Changer Kit with Pole

Use Pliers come Remove broken Bulb indigenous Socket

This is most likely the many recognizable way to eliminate a damaged bulb; using a pair that pliers. The more intact the bulb the much easier it is v this version. Use the pliers come grip the glass basic of the filament, and very gently twist counter-clockwise. This should allow the basic to unscrew native the socket and also be removed. If not, however, it’s most likely that the filament will break instead.

If the filament division off, carefully dispose of it and also return to the broken bulb. Ar the needle sleep pliers right into the base of the bulb and open them as wide as friend can, so the the 2 tips ware ~ above opposite political parties of the base. Turn counter-clockwise and also your bulb should start to unscrew. If you need much more grip on your pliers, pave the ends with electrical tape.

Use A Potato TO eliminate The damaged Light bulb

Yes, you’ve heard this right: you deserve to use a potato to eliminate a broken bulb indigenous its socket.

Break off any remaining glass, being an extremely careful when doing so. Cut the potato in fifty percent and push it firmly versus the socket. Twisted counter-clockwise; the potato should allow the base of the pear to turn while the socket continues to be still. Your broken base will certainly be removed, and also then you have the right to throw both it and also the potato away (don’t usage the potato afterwards, together it may have glass in that still).

Use Epoxy To eliminate A broken Lightbulb

If your bulb is in a hard-to-reach place, you deserve to use some quick setup epoxy to eliminate it from the socket. Prior to you begin with this route, clean the remainder of the glass off the bulb, so the there’s no one left. Mix increase your piece of epoxy and also pack it into the basic of the bulb. Press a level head screwdriver into the epoxy and also remove it, leaving the impression.


After the epoxy dries (this relies on the kind you’ve used, however for rapid drying it’s generally round 5 minutes), you deserve to use the screwdriver to unscrew the base, lot like it to be a screw itself.

DO NOT use THESE methods TO remove A damaged LIGHTBULB

Don’t ever try to eliminate the pear base through your hands, as you’re likely to gain cut. There’s additionally the hazard of damaging the socket together well. If none of the above ways have worked for you, you can constantly buy a damaged bulb extractor from your hardware store.

When your light pear breaks, girlfriend don’t need to worry about removing it. Simply follow among the steps above, always remembering to carry out so safely, and also you do not do it have any kind of problems in ~ all.

See more: How Long Does It Take Tylenol Pm To Get Out Of Your System ?

If you have actually questions or comments, please leave your info below and we will get ago to you to assist.